Paper Grid Generator

Exact-size printable grids · dots, squares, lines & more
Paper
Grid
0 = no major lines. (Graph & square grids.)
Calligraphy
Multiples of the x-height. E.g. 2 & 2 with a 5 mm x-height gives the classic 2:1:2 Copperplate proportions (10 / 5 / 10 mm).
Rows: dashed ascender line, solid waistline, heavier baseline, dashed descender line. "Halfway" adds the 1st ascender/descender lines (dotted) midway through those spaces — standard on Copperplate sheets. Slant angle is measured from the baseline (Copperplate 55°, vertical = 90°).
Margins (mm)
Cut tiles
Print one sheet, then cut into smaller pages.
Division guides
Marks the centre & thirds of every tile — handy for ruling a page in half. For dot grids the cell count is snapped (even / ×3) so the divisions land exactly on dots, shown as extra dots just outside the grid (1 dot = centre, 2 dots = a third). Other grids get faint edge ticks. Applied per tile (the whole sheet when not cutting).
Pages
Prints this many copies of the grid. When numbering is on, each printed page gets its number centred at the bottom. The on-screen preview always shows a single sheet (page 1).
Print accuracy
Keep the browser print dialog at Scale 100% and Margins None. If your printer still shrinks or stretches the output, print with the 100 mm calibration rulers, measure them, then adjust these corrections. Example: if a 100 mm ruler prints as 99 mm, use 101.01%.
Saved grids
Your current settings are remembered automatically. Save named presets to switch between favourite grids.